Stratasys
FDM HIPS
FDM · HIPS · Light Gray
FDM HIPS (high-impact polystyrene) is an inexpensive general-purpose 3D printing thermoplastic, similar to ABS but with higher impact resistance, intended for producing fixtures and prototypes at reduced cost.
19.6 MPa (XZ, Break)
Tensile Strength
1.98 GPa (XZ)
Tensile Modulus
8.7% (XZ, Break)
Elongation at Break
Finish and colour of the material as printed
Why choose FDM HIPS?Why this material
High impact resistance
Low cost
Properties similar to ABS
Suited to prototyping and fixture production
Technical propertiesVerified figures only
19.6 MPa (XZ, Break)
20.3 MPa (ZX, Break), ASTM D638
Tensile Strength
1.98 GPa (XZ)
1.93 GPa (ZX)
Tensile Modulus
8.7% (XZ, Break)
2.8% (ZX, Break)
Elongation at Break
Light Gray
Natural Color
Typical applicationsWhat it is used for
Production tooling (jigs, fixtures)
Prototypes with lower performance requirements
Compatible printersSystems that run this material
Fortus 450mc
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- High impact resistance
- low cost
- ABS-like
Need help choosing a material?
Our team will help you match the project, the technology and the right material.