Stratasys
Diran 410MF07
FDM · Engineering thermoplastic
Diran 410MF07 is a nylon-based FDM thermoplastic filled with 7% minerals by weight, with high toughness and impact resistance and chemical resistance to hydrocarbons, and a smooth surface that gives low sliding friction.
40.4 MPa (XZ, Break)
Tensile Strength
1.69 GPa (XZ)
Tensile Modulus
12% (XZ, Break)
Elongation at Break
90°C (194°F) @66 psi
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Diran 410MF07?Why this material
Very high toughness and impact resistance
Chemical resistance to hydrocarbons
Low sliding friction thanks to a smooth surface
A non-marring interface against work surfaces
Technical propertiesVerified figures only
40.4 MPa (XZ, Break)
30.7 MPa (ZX, Break), ASTM D638
Tensile Strength
1.69 GPa (XZ)
1.46 GPa (ZX)
Tensile Modulus
12% (XZ, Break)
3.1% (ZX, Break)
Elongation at Break
90°C (194°F) @66 psi
70°C (158°F) @264 psi (XY and XZ/ZX), ASTM D648
Heat Deflection Temperature
1.16
(Specific Gravity, ASTM D792)
Density
Typical applicationsWhat it is used for
Production tooling (jigs and fixtures)
Other general production tooling
Compatible printersSystems that run this material
F370
F370CR
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- Hydrocarbon resistant
- low friction
- non-marring surface
Need help choosing a material?
Our team will help you match the project, the technology and the right material.