Stratasys
FDM ABS-CF10
FDM · ABS CF
ABS-CF10 combines standard ABS with 10% chopped carbon fibre by weight, producing a thermoplastic filament that is 50% stiffer and 15% stronger than standard ABS, with low moisture sensitivity.
39.4 MPa yield (XZ)
Tensile Strength
3.8 GPa (XZ)
Tensile Modulus
1.6% (XZ, Break)
Elongation at Break
112.2°C XY
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose FDM ABS-CF10?Why this material
Increased stiffness and reduced weight
Low moisture sensitivity
An improved strength-to-weight ratio
Anisotropic properties that vary with print orientation
Technical propertiesVerified figures only
39.4 MPa yield (XZ)
19.6 MPa yield (ZX)
Tensile Strength
3.8 GPa (XZ)
2.27 GPa (ZX)
Tensile Modulus
1.6% (XZ, Break)
1.1% (ZX, Break)
Elongation at Break
112.2°C XY
113.5°C XZ @66 psi · 111.4°C XY / 112.9°C XZ @264 psi, ASTM D648
Heat Deflection Temperature
1.0972 g/cm³
ASTM D792
Density
Typical applicationsWhat it is used for
Production tooling
Jigs and fixtures
End effectors
Compatible printersSystems that run this material
F170
F190CR
F370
F370CR
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- Carbon fiber reinforced
- low moisture sensitivity
- lightweight
Need help choosing a material?
Our team will help you match the project, the technology and the right material.