Formlabs
Nylon 12 Tough Powder
SLS · PA12 · Grey
A nylon powder with high ductility and dimensional accuracy, intended for prototyping and small-batch production, with reduced warpage and no loss of strength. It requires powder aging before first use, and is intended for the Fuse 1+ 30W printer.
42 MPa (6200 psi) per
Tensile Strength
1450 MPa (215 ksi) per
Tensile Modulus
25%
Elongation at Break
46°C (116°F) at 1.8 MPa
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Nylon 12 Tough Powder?Why this material
A refresh rate that leads the nylon powder category
High ductility
Excellent dimensional accuracy throughout the build chamber
Reduced warpage
Technical propertiesVerified figures only
42 MPa (6200 psi) per
ASTM D638-14 Type 1
Tensile Strength
1450 MPa (215 ksi) per
ASTM D638-14 Type 1
Tensile Modulus
25%
orientation Z: 15% per ASTM D638-14 Type 1
Elongation at Break
46°C (116°F) at 1.8 MPa
161°C (321°F) at 0.45 MPa per ASTM D648-16
Heat Deflection Temperature
Grey
Natural Color
Typical applicationsWhat it is used for
High-performance, impact-resistant prototypes and production parts
Parts that need flexibility – snaps, ratchets and hinges
Long parts prone to warping
Compliant mechanisms
Compatible printersSystems that run this material
Fuse 1+ 30W
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- High refresh rate
- ductile
- reduced warpage
Similar materials
Other SLS materials from a related family or with similar properties
Need help choosing a material?
Our team will help you match the project, the technology and the right material.