Formlabs
Nylon 12 Powder
SLS · PA12 · Grey
An SLS powder for strong functional prototypes and end-use parts, with high tensile strength, ductility and environmental stability, suited to complex assemblies and durable parts with minimal water absorption.
50 MPa (7252 psi) per
Tensile Strength
1850 MPa (268 ksi) per
Tensile Modulus
11%
Elongation at Break
87°C (189°F) at 1.8 MPa
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Nylon 12 Powder?Why this material
High tensile strength and ductility
Environmental stability
Minimal water absorption
Suited to complex assemblies and durable parts
Technical propertiesVerified figures only
50 MPa (7252 psi) per
ASTM D638 Type 1
Tensile Strength
1850 MPa (268 ksi) per
ASTM D638 Type 1
Tensile Modulus
11%
orientation Z: 6% per ASTM D638 Type 1
Elongation at Break
87°C (189°F) at 1.8 MPa
171°C (340°F) at 0.45 MPa per ASTM D648
Heat Deflection Temperature
Grey
Natural Color
HB
(per UL 94 section 7 at a thickness of 3.00 mm)
Flame Rating
Typical applicationsWhat it is used for
Functional prototypes
Complex assemblies and durable parts with high environmental stability, for low-volume production
Jigs, holding fixtures and permanent production tooling
Biocompatible medical parts such as orthotics and prosthetics
Compatible printersSystems that run this material
Fuse X1
Fuse 1+ 30W
Fuse 1
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- High tensile strength
- ductile
- low moisture absorption
Need help choosing a material?
Our team will help you match the project, the technology and the right material.