Formlabs
Tough 2000 Resin V2
SLA · Engineering photopolymer · Grey (dark, matte)
A stiff, strong material whose toughness competes with ABS, with high heat and creep resistance. V2 offers three times the fracture toughness, better thermal performance and a darker matte finish than the previous version.
26.1 MPa (green)
Tensile Strength
1235 MPa (green)
Tensile Modulus
149% (green)
Elongation at Break
45°C green
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Tough 2000 Resin V2?Why this material
Combines ABS-level strength with superior impact resistance and toughness
Holds its structural integrity under mechanical and environmental stress (79% elongation before break after curing)
Production-ready parts with a dark matte appearance and sharp detail
Long-term resistance to wear and deformation, suited to the factory floor
Technical propertiesVerified figures only
26.1 MPa (green)
40.4 MPa (post-cured), ASTM D638-14
Tensile Strength
1235 MPa (green)
1800 MPa (post-cured), ASTM D638-14
Tensile Modulus
149% (green)
79% (post-cured), ASTM D638-14
Elongation at Break
45°C green
57°C post-cured · [email protected]: 53°C green / 70°C post-cured, ASTM D648-16
Heat Deflection Temperature
61D (green)
76D (post-cured), ASTM D2240
Shore Hardness
Bulk 1.09 g/mL
Liquid 1.03 g/mL (post-cured), ASTM D792-20
Density
Grey
(dark, matte)
Natural Color
Not Tested (green)
HB (post-cured, UL 94)
Flame Rating
Typical applicationsWhat it is used for
Parts that need ABS-level strength and stiffness
Strong housings with high temperature requirements
Assembly fixtures for prolonged use in production
Functional prototypes and production-ready end-use parts
Compatible printersSystems that run this material
Form 4 / Form 4L where officially compatible
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- ABS-like strength
- high toughness
- production-ready finish
Need help choosing a material?
Our team will help you match the project, the technology and the right material.