Formlabs
Fast Model Resin
SLA · Photopolymer · Grey (matte)
Fast Model Resin is Formlabs’ fastest resin, capable of printing at over 100 mm per hour. It produces dental models in under 10 minutes or large prototypes in under two hours, and prints three times faster than earlier Draft Resin versions.
46 MPa (green)
Tensile Strength
2.18 GPa (green)
Tensile Modulus
22% (green)
Elongation at Break
47°C/49°C/61°C
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Fast Model Resin?Why this material
An exceptional print speed of over 100 mm per hour
Fast turnaround for dental and prototyping applications
Flexible resolution options (200 or 100 micron)
High accuracy on the Form 4 system
Technical propertiesVerified figures only
46 MPa (green)
55 MPa (post-cured 5 min at room temperature) / 62 MPa (post-cured 15 min at 60°C), ASTM D638-14
Tensile Strength
2.18 GPa (green)
2.48 GPa (post-cured 5 min) / 2.67 GPa (post-cured 15 min at 60°C), ASTM D638-14
Tensile Modulus
22% (green)
15% (post-cured 5 min) / 11% (post-cured 15 min at 60°C), ASTM D638-14
Elongation at Break
47°C/49°C/61°C
[email protected]: 55°C/58°C/76°C (green/post-cured 5 min/post-cured 15 min), ASTM D648-16
Heat Deflection Temperature
Grey (matte)
Natural Color
Typical applicationsWhat it is used for
Early-stage prototypes
Rapid design iterations
Dental models for thermoforming aligners
Compatible printersSystems that run this material
Form 4 / Form 4L where officially compatible
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- Ultra-fast printing
- dental-grade
- flexible resolution
Need help choosing a material?
Our team will help you match the project, the technology and the right material.