EOS
Alumide
SLS · PA12 aluminum-filled · Metallic gray
A typical use of ALUMIDE is producing stiff parts with a metallic appearance – for example automotive applications (wind tunnel testing or non-safety-critical parts), injection moulds for short runs, presentation models with a metallic look, and educational or jig-making purposes.
46 ± 3 N/mm²
Tensile Strength
3800 ± 150 N/mm²
Tensile Modulus
3.5 ± 1%
Elongation at Break
177.1°C
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Alumide?Why this material
The surface can be finished by sanding, polishing or coating
Can be machined with low tool wear – milling, drilling or turning
Technical propertiesVerified figures only
46 ± 3 N/mm²
(DIN EN ISO 527)
Tensile Strength
3800 ± 150 N/mm²
(DIN EN ISO 527)
Tensile Modulus
3.5 ± 1%
(DIN EN ISO 527)
Elongation at Break
177.1°C
(ASTM D648, 0.45 MPa)
Heat Deflection Temperature
76 ± 2 Shore D
(DIN 53505)
Shore Hardness
1.36 ± 0.05 g/cm³
(sintered part, method EOS)
Density
Metallic gray
Natural Color
Typical applicationsWhat it is used for
Design elements
Jigs and fixtures
Small-batch injection moulds
Compatible printersSystems that run this material
EOSINT P 700
EOSINT P 380
EOSINT P 360
EOSINT P 350/2
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- 50 wt% aluminum-filled
- high stiffness
- metallic appearance
- easy postprocessing
Need help choosing a material?
Our team will help you match the project, the technology and the right material.