Bambu Lab · Bambu Lab
Bambu PLA Basic
FFF · PLA
A PLA built for high-speed printing and the base of the Bambu Lab line: easy to print, stiff and strong enough for most needs, with good layer adhesion.
35 ± 4 MPa
Tensile Strength
2580 ± 220 MPa
Tensile Modulus
12.2 ± 1.8 %
Elongation at Break
57°C @ 0.45 MPa
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Bambu PLA Basic?Why this material
Easy, reliable printing
Better Z-layer strength than generic PLA
Wide, consistent colour range
Technical propertiesVerified figures only
35 ± 4 MPa
(ISO 527, X-Y)
Tensile Strength
2580 ± 220 MPa
(ISO 527, X-Y)
Tensile Modulus
12.2 ± 1.8 %
(ISO 527, X-Y)
Elongation at Break
57°C @ 0.45 MPa
54°C @ 1.8 MPa (ISO 75)
Heat Deflection Temperature
1.24 g/cm³
(ISO 1183)
Density
Typical applicationsWhat it is used for
Prototypes and appearance models
Enclosures and light-duty parts
Coloured models
Compatible printersSystems that run this material
Bambu Lab
Bambu Lab
DocumentsTechnical data sheet
Technical Data SheetSource: manufacturer
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- strong interlayer adhesion
- impact resistant
Need help choosing a material?
Our team will help you match the project, the technology and the right material.