Bambu Lab · Bambu Lab
Bambu PLA Aero
FFF · PLA
A PLA that foams at high print temperatures, creating small voids inside the part for very light prints.
24 ± 2 MPa
Tensile Strength
1350 ± 250 MPa
Tensile Modulus
2.6 ± 0.7 %
Elongation at Break
53°C @ 0.45 MPa
Heat Deflection Temperature
Finish and colour of the material as printed
Why choose Bambu PLA Aero?Why this material
Very low weight
Controllable density
Easy to print
Technical propertiesVerified figures only
24 ± 2 MPa
(ISO 527, X-Y)
Tensile Strength
1350 ± 250 MPa
(ISO 527, X-Y)
Tensile Modulus
2.6 ± 0.7 %
(ISO 527, X-Y)
Elongation at Break
53°C @ 0.45 MPa
48°C @ 1.8 MPa (ISO 75)
Heat Deflection Temperature
1.21 g/cm³
(ISO 1183)
Density
Typical applicationsWhat it is used for
UAVs
Aerodynamic models
Gliders
Compatible printersSystems that run this material
Bambu Lab
Bambu Lab
DocumentsTechnical data sheet
Technical Data SheetSource: manufacturer
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- lightweight
Need help choosing a material?
Our team will help you match the project, the technology and the right material.