Stratasys
P3 Stretch 80
DLP / P3 · Elastomer · Matte black
P3 Stretch 80 is a general-purpose elastomer, easy to work with and fast to print, intended for flexible prototypes and end-use parts. Developed by Forward AM for use with Origin equipment, it is an excellent substitute for traditional polyurethane or TPU.
11 ± 2.4 MPa
Tensile Strength
54 ± 4.5 MPa (Young’s Modulus)
Tensile Modulus
117 ± 17.4%
Elongation at Break
87 ± 1.2 Shore A
Shore Hardness
Finish and colour of the material as printed
Why choose P3 Stretch 80?Why this material
Excellent rebound
A higher durometer, which allows faster print speeds
An exceptional surface finish, ideal for elastomeric parts that need both appearance and grip
Good mechanical properties and chemical resistance
A simple cleaning process and UV post-cure
Lower viscosity than typical elastomers
Technical propertiesVerified figures only
11 ± 2.4 MPa
ASTM D412 Type C
Tensile Strength
54 ± 4.5 MPa (Young’s Modulus)
ASTM D412
Tensile Modulus
117 ± 17.4%
ASTM D412 Type C
Elongation at Break
87 ± 1.2 Shore A
(3 seconds)
Shore Hardness
Matte black
Natural Color
Typical applicationsWhat it is used for
Aerospace and transport
Automotive – seals, air seals, ports and air ducts
Industrial flexible prototypes (cable accessories, protective guards, seals, cable guides)
Production aids (fixtures and assembly jigs)
Form and fit testing for consumer products (footwear, watch straps, accessories)
Compatible printersSystems that run this material
Origin Two
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- Elastomeric
- high rebound
- fast printing
Need help choosing a material?
Our team will help you match the project, the technology and the right material.