Henkel
P3 Stretch IND475
DLP / P3 · Elastomer · White (the mechanical data shown is for the white grade); also available in black
A single-component UV resin that cures into a soft elastomeric material, offering a good balance of stiffness, strength and elongation. It is a low-viscosity liquid that prints at room temperature on a range of DLP platforms.
3.1 ± 0.3 MPa
Tensile Strength
1.1 ± 0.5 MPa
Tensile Modulus
201 ± 16%
Elongation at Break
57/42 A
Shore Hardness
Finish and colour of the material as printed
Why choose P3 Stretch IND475?Why this material
True elastomeric behaviour
Fast printing with low shrinkage
High resilience and energy return
Technical propertiesVerified figures only
3.1 ± 0.3 MPa
(ASTM D638)
Tensile Strength
1.1 ± 0.5 MPa
(ASTM D638)
Tensile Modulus
201 ± 16%
(ASTM D638)
Elongation at Break
57/42 A
(0s/5s, ASTM D2240)
Shore Hardness
1.04 g/cm³
(ASTM D792)
Density
White (the mechanical data shown is for the white grade)
also available in black
Natural Color
Typical applicationsWhat it is used for
Air and dust seals
Flexible seals and housings
Cushioning pads
Compatible printersSystems that run this material
Origin Two
DocumentsTechnical data sheet
Technical Data Sheet
Download the Technical Data SheetMaterial characteristicsAppearance and classification
- Elastomeric
- low shrinkage
- high energy return
Need help choosing a material?
Our team will help you match the project, the technology and the right material.